0%

Navigate to Network Settings menu of Syntec 10MF control

Navigate to Network Settings menu of Syntec 10MF control

black button
cncmonce.exe
kvm
network setting
switch display
syntec control software
syntec network setting menu

Navigate to the Network Setting menu in the Syntec 10MF control:

  1. Switch the monitor to display the Syntec control by pressing the black button to switch the KVM on the remote station. The display will be switched from the PC to the control. See "KVM Black Button" picture for the location.

  2. Open the Syntec operator interface, CncMonCE.exe.

  3. Once the interface software has initiated, navigate to the Network Setting menu. The path for Network Setting menu is as follows :

    F6(Parameter) --> F10(Next Page) --> F3(Network Setting).

0%